Table of Contents
Advertisement
INDEX
POWER SOURCES........................................................... 1
OPERATING ON BATTERY............................................... 1
OPERATING ON AC ADAPTOR........................................ 2
POWER INDICATION....................................................... 3
BATTERY CHARGE........................................................... 3
CLOCK FUNCTION..........................................................4
SET THE CLOCK...........................................................4
SELECT TIME MODE......................................................5
MW STEP 9K/10K SELECTION.............................................5
TURN ON / OFF THE UNIT.................................................. 6
POWER ON / OFF........................................................ 6
AUTO TURN ON /OFF ..................................................6
SLEEP......................................................... ...............6
BAND SELECTION.......................................................... .7
METER BAND................................................................. 7
LOCAL / DX SWITCH........................................................7
PAGE FUNCTION............................................................8
TUNING INTO STATIONS................................................... 8
MANUAL TUNING........................................................ 8
AUTO SCAN TUNING.................................................... 9
SPEED CHANGE TUNING............................................ 10
DIRECT FREQUENCY ENTRY......................................... 11
MEMORY SCAN TUNING............................................. 13
PRESET STATIONS...........................................................14
RANDOM PRESET.......................................................14
Advertisement
Table of Contents
Summary of Contents for Kaito KA1102
-
Page 1: Table Of Contents
INDEX POWER SOURCES............1 OPERATING ON BATTERY..........1 OPERATING ON AC ADAPTOR........2 POWER INDICATION............3 BATTERY CHARGE............3 CLOCK FUNCTION............4 SET THE CLOCK............4 SELECT TIME MODE............5 MW STEP 9K/10K SELECTION..........5 TURN ON / OFF THE UNIT..........6 POWER ON / OFF............6 AUTO TURN ON /OFF ..........6 SLEEP............ -
Page 2: Power Sources
INDEX POWER SOURCES BAND PRESET............15 OPERATING ON BATTERY ATS ..............17 BATTERY INSTALLATION COPY FUNCTION............19 1. Slide the battery lid. DELETE PRESET STATIONS..........20 2. Insert three AA batteries with RECEIVE SSB & CW............ 21 correct polarity as shown in SET ALARM BY BEEP............ 22 the compartment. -
Page 3: Operating On Ac Adaptor
POWER INDICATION When the unit is not being used for a long period of time, The battery power is divided into 4 levels. remove the batteries to avoid damage from battery leakage and corrosion. Exhausted, auto shut off Lower If battery leakage occurs, wipe the battery compartment with a soft cloth before inserting new batteries. -
Page 4: Clock Function
CHECK CURRENT TIME The unit will adjust the current speed automatically during 1. When the unit is off, current time indicates in the display. charging. 2. When the unit is on, hold down EXIT button about 0.5 second Use NiMH batteries, and do not charge them for more than to display current time 3 seconds. -
Page 5: Turn On / Off The Unit
BAND SELECTION FM, MW, SW band can be select by pressing corresponding ENTER band button. Press button 1 or 2 Press FM button to select FM band; Press MW button 3. Press ENTER button, 9-10 appears in the display for three to select MW band. -
Page 6: Tuning Into Stations
PAGE The frequency changes in the channel steps shown below each time the button is pressed. There are total 10 pages for you to store stations. Each page can store 19 stations. Stations can be random stored on page Band Step Page 1-6. -
Page 7: Speed Change Tuning
1. Press POWER button to turn on the unit. 4. Hold down SCAN+ or SCAN- button for about 1 second, 2. Turn to Page 9. release when the frequency changes, the unit starts to tune till into the stations automatically. When a station is tuned in, appears in the display. -
Page 8: Memory Scan Tuning
Memory Scan Tuning ¼ Ç Ò ä µ ç Ì ¨ from the display for 6 seconds. 4. Press the number button with complete frequency, the unit will tune into the entered frequency. DE1102 POWER You must go to next step in 6 seconds, otherwise the unit will exit direct entry mode. -
Page 9: Preset Stations
PRESET STATIONS 4. Press the desired number from 1-6 while P is flashing. 5. Press M/LOCK button , M flashes for 5 seconds. There are total 10 pages (Page 0-9) for you to preset stations. 6. Press a preset number from 1-19 to memorize the station. The Up to 19 stations can be preset on each page. -
Page 10: Ats
ATS Preset ( On Page O) DE1102 POWER DE1102 POWER ENTER CHARGE EXIT LOCK FM ST S. STRENGTH SCAN Ö Ç Ä Ü ³ ä µ ç Ð Å º Å Ç ¿ ENTER ¶ È ³ ¬ Ö Ø µ Í Ò ô Ö... -
Page 11: Copy Function
Repeat ATS COPY FUNCTION After a ATS operation, if the preset number is not full or some All stored stations on Page 0 can be copied to other page. If scanned stations are unnecessary, you can delete some stations, copy to page 7-9, please note the band must be constant. and repeat ATS operation. - Page 12 DELET STATIONS On page 0, the preset number order will be adjusted automatically when a preset station is deleted. DE1102 If a preset station on page1~9 is deleted, the deleted preset POWER number is blank. It can be used on next preset. ENTER CHARGE EXIT...
-
Page 13: Set Alarm By Beep
SET ALARM BY BEEP You have to go to the next step in 6 seconds, or the unit When alarm indicator constantly displays, alarm function runs. will exit from the beep setting and return to clock mode. The unit will beep when the preset time reaches. The beep volume is not controlled by digit volume button. - Page 14 AUTO TURN ON / OFF THE UNIT 3. Press number button to input the desired frequency. Press ENTER button to confirm the last preset frequency.), Then Total three groups of different auto turn on / off time can be set in the unit goes into volume control mode.
-
Page 15: Set Sleep Time
LOCK FUNCTION SET SLEEP TIME The lock function can be used to avoid any accidental operation when the unit is being carried or used. 1. Press POWER button to turn on the unit. Hold down LOCK button for 2 seconds till appears in a. -
Page 16: Wide / Narrow Band
SIGNAL STRENGTH / FM STEREO WIDE / NARROW BAND Press AM: W/N button repeatedly to select wide band or DE1102 The unit has signal strength and POWER narrow band when listening MW or SW broadcasting. FM stereo indicator. ENTER In MW and SW band, light 1.2.3. CHARGE EXIT LOCK... -
Page 17: Listening With Earphones
LISTENING WITH EARPHONES USING ANTENNA When listening to stereo reception, normally use earphone and set MONO/STEREO button FM Reception to STEREO. Speaker has MONO effect only. Telescopic antenna functions as FM antenna, keep it extended and change its length and direction to find the position which gives the best reception. -
Page 18: Cautions
SW Reception CAUTIONS Telescopic antenna functions as Avoid exposure to temperature extremes, direct sunlight, SW antenna. Extending the moisture, sand, dust or mechanical shock. antenna straight upward to get Should anything go wrong with the radio, please remove DE1102 the best reception. POWER the batteries and have the unit checked by qualified ENTER... -
Page 19: Specifications
SPECIFICATIONS 1. Frequency Range 70.00 - 108.00 MHz 520 - 1710 KHz 3.000 - 29.995 MHz 3.160 - 3.455 MHz 11.510 - 12.155 MHz 3.860 - 4.055 MHz 13.510 - 13.905 MHz 4.710 - 5.105 MHz 15.010 - 15.705 MHz 5.910 - 6.255 MHz 17.260 - 18.105 MHz 7.010 - 7.405 MHz...
Need help?
Do you have a question about the KA1102 and is the answer not in the manual?
Questions and answers