Initial Settings - Bush LCD32F1080P Instruction Manual

Initial Settings

When the TV set is operated for the first time,
the IDTV turns on first.
Because this is the first time the TV is used, there
are no channels stored in the memory and the
following message appears on the screen:
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
• To start installation process, select "Yes",
to cancel select "No".
• To select the "Yes" or "No" option, highlight
the item by using or
the OK button.
The IDTV will automatically tune to the UHF
transmision channels 21 to 68, searching for
digital terrestrial TV broadcasts and displaying
the names of channels found. This process
will take about five minutes. To cancel
searching, you can press the M button at any
time during the process.
AUTOMATIC SEARCH
Channels:
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
12 %
Cancel search
MEN U
After Automatic Search is completed, the
following message asking for analogue channel
search appears on the screen:
ENG-32761-1205UK-32 INCH 17MB26 UK IDTV-(WO SVHS-ECO PIP)(3D PANORAMA)-50138695.p65
To seach for analogue channels, select "Yes".
TV switches to the analogue TV mode. The
menu below is displayed to search for
analogue channels:
No
buttons and press
Select your Language, Country and Text
language by using
Press OK button to continue. To cancel, press
the BLUE button.
For more information on this process, see
"Install Menu" section.
NOTE: For proper functioning of digital teletext
English - 18 -
18
Do you want to search for
analogue channels?
Yes No
AUTO PROGRAM
Country
Text language
or and
in DTV mode, you should set country
as UK in analogue AUTO PROGRAM.
19.11.2008, 08:34
UK
West
 /  buttons.