Viewing The Connections - Bush LCD32F1080P Instruction Manual

Viewing the Connections

B
C
D
REAR VIEW
This connector is for service use only. .
Video Input is used for connecting video signals of external devices.
Connect the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
Audio Inputs are used for connecting audio signals of external devices.
Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT
jacks on your device.
Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
Subwoofer Out is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
CI Slot and SPDIF Out. CI Slot is used for inserting a CI card. A CI card allows you to view all
the channels that you subscribe to. For more information, see "Common Interface" section. S/
PDIF Out is used for transferring digital audio signals. Use an RCA cable to transfer audio
signals to a device that has S/PDIF input.
PC Input is for connecting a personal computer to the TV set.
ENG-32761-1205UK-32 INCH 17MB26 UK IDTV-(WO SVHS-ECO PIP)(3D PANORAMA)-50138695.p65
I J K P
G E H
RS-232 IN
English - 9 -
9
L
M N O A
19.11.2008, 08:34
F