Emptying The Dust Container; Maintenance - Hoover 5013PH Dog & Cat User Manual

Instructions for Use
Assembling the vacuum cleaner (continued)
4. Push the telescopic tube 5. Extend or reduce the length
into the powerhead until it of the telescopic tube by
clicks into place. To remove, moving the slider.
press button and separate.
Instructions for Use
Before using appliance, unwind a sufficient
length of cable and insert the plug into the
power socket. A yellow mark on the power
cable shows the ideal cable length. Don't
expend the cable beyond the red mark.
1. Press the ON/OFF button to switch the
appliance on.
2. To rewind the power cable, press the
rewind button with one hand and guide
the cable with the other hand to ensure
that it does not whip causing damage.
8.
(continued)
6. ON/OFF switch controls
powerhead.
ON/OFF Button
Yellow Mark
Red Mark
Cord Rewind Button

Maintenance

WARNING! Ensure the cleaner is not connected to the mains powers supply
when performing any maintenance duties.
For reasons of hygiene and in order to achieve maximum suction, the dust container should
be emptied and the filter cleaned after every operation or when the maximum level indicator
is reached. Always ensure that after cleaning the filters are in place. Use of the machine without
the filters in place may result in reduced suction or motor damage.

Emptying the Dust Container

1. Remove the hose and tubes for the
machine. Hold the handle and press
the release button.
2. Lift out the dust container.
9.