Video Recording; Basic Recording - JVC LYT0087-001B Instructions Manual

14
EN
LENS COVER Switch
Power Switch
Start/Stop Button
System Select Switch
Tally lamp
(lights while recording
is in progress)

VIDEO RECORDING

NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power (
Tape Length Setting (
Grip Adjustment (
Power
1
indicator
2
3
pg. 6)
pg. 10)
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
ENTER RECORD-STANDBY MODE
Slide the LENS COVER Open/Close Switch to open
the lens cover. Set the System Select Switch to
"VIDEO", then set the Power Switch to "CAMERA".
•The power indicator lights and the camcorder
enters the Record-Standby mode.
•The scene you're aimed at appears on the
viewfinder screen, with the word "PAUSE"
superimposed upon it.
START SHOOTING
Press the Recording Start/Stop Button.
REC
•" " appears in the viewfinder while recording is
in progress.

Basic Recording

pg. 12)