Section 3 - Configuration
LAN Connection
Use the drop-down menu to select Static IP if you
Type:
want to manually assign the IP address, subnet
mask, and gateway addresses.
Access Point IP
Enter the IP address you want to assign the bridge.
Address:
Subnet Mask:
Enter the Subnet Mask you want to assign the
bridge.
Gateway Address:
Enter the Gateway you want to assign the bridge.
Enter the Device Name of the AP and click Next to
Device Name:
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
D-Link DAP-1155 User Manual
Static IP
41