Maintenance; Assembly Instructions - Anvil COA1001 R01 Installation And Care Manual

EXPLODED DIAGRAM
MINI PRIMA CONVECTION OVEN
MODEL: COA1002 R01
The doors can be removed for cleaning.

(Assembly instructions)

Step 2
(side view)
Rotate the Hinge Lock
to up position (both sides)
Hinge lock - must be in
up/locked position
Side of Oven

MAINTENANCE

Replacement of the internal lamp
1. Disconnect the appliance from the power supply and let it cool
down if hot.
2. Remove the shelf support grid.
3. Unscrew the glass cover and replace the lamp with the correct
specification – 230V/ 25 W or 120V/ 15 W in case of the
COA1001-120 & COA1002-120.
4. Reassemble in the reverse order.
Step 1
(side view)
Open the door fully
Hinge lock - in "down/unlocked"
position
Side of Oven
Door (fully opened; does not open flat)
Step 3
(side view)
Top Hook Roller
Hinge lock - in
up/locked position
(2)
(1)
Hinge Arm
Side of Oven
1) Tilt door up at about 45° angle until the Top Hook
on the Hinge Arm is lower than the Top Hook Roller,
2) then pull out of Hinge Slots