Cleaning And Maintenance Instructions - Anvil COA1001 R01 Installation And Care Manual

Burn Hazard.
Do not touch hot food,liquid or heating surfaces
while equipment is heating or operating
Hot surfaces and food can burn skin. Allow the hot surfaces to cool
before handling

CLEANING AND MAINTENANCE INSTRUCTIONS

1. Always ensure that the unit is disconnected from the main power
supply before cleaning.
2. The unit should not be cleaned with a water jet or immersed in
water. Use only a damp cloth or sponge dipped in soapy water.
3. Always clean equipment thoroughly before first use. However,
do not use chlorine or chloride – based products to clean the
unit. These may lead to corrosion and pitting and will result in
voiding the warranty on the unit.
4. Wipe off the unit with a dry cloth and wait at least half an hour
before re – connecting to the main power outlet.
5. The unit is fitted with Low 'E' on the inside of the door glass
which reflects heat inward making heat retention more efficient.
Scouring with abrasive cleaners will damage coating and invali-
date warranty.
THIS APPLIANCE SHOULD NOT BE CLEANED WITH
A WATER JET OR IMMERSED IN WATER. USE ONLY
A DAMP CLOTH OR SPONGE DIPPED IN SOAPY
WATER. DO NOT USE STEEL-WOOL WHICH WILL
MARK THE BRIGHT STAINLESS STEEL FINISH
WARNING
MODEL:MINI PRIMA CONVECTION OVEN
MODEL CODE : COA1002 R01
Part
Description
No.
1 BAKE ELEMENT
2 GRILL ELEMENT SUPPORT BRACKET
3 PROBE CLAMP
4 GRILL ELEMENT
5 GRILL ELEMENT CLAMPING BRACKET
6 ELEMENT CLAMP SCREW
7 FAN COVER ASSEMBLY
8 MINI PRIMA SHELF RUNNER
9 MINI PRIMA SHELF
10 OVEN DOOR HANDLE NODE
11 DOOR HANDLE TUBE
12 MINI PRIMA OUTER GLASS PRINTED
13 DOOR COMPLETE
14 MINI PRIMA OVEN DOOR HINGE
15 MINI PRIMA INNER GLASS
16 MINI PRIMA DOOR SEAL
17 THERMOSTAT
18 SELECTOR SWITCH
19 BAKE FACIA INSERT
20 PILOT LIGHT
21 KNOB
22 CONTROL BEZEL
23 GRILL BEZEL
24 TIMER FACIA INSERT
25 TIMER BEZEL
26 CONTROL FACIA INSERT
27 FACIA
28 2HR TIMER
29 THERMOSTAT
30 LARGE RUBBER FEET
31 BOTTOM COVER
32 OUTER BODY WRAPPER
33 OVEN LIGHT BULB
34 OVEN LIGHT BULB HOLDER
35 CABLE GRIP
36 POWER CORD
37 TERMINAL BLOCK
38 MINI PRIMA FAN MOTOR
39 BACK COVER PANEL
40 FAN MILLBOARD
41 CHIMNEY ASSEMBLY
42 INSIDE SHELL ASSEMBLY
43 CONTROL PANEL ENCLOSURE