Epson EB-1430Wi Installation Manual page 55

Installation Guide
b
Check the installation location, and secure with commercially available M4 screws (20 mm
x4)
Secure the Control Pad with commercially available M4 screws (20 mm x4)
Warning
•
Secure so that the screws are not angled on the installation side.
•
Make sure the Control Pad is firmly secured.
•
Do not secure the Control Pad with double-sided sticky tape or magnets.
c
•
We recommend checking the Control Pad operations before securing it with the screws.
•
When installing the Control Pad on a table, attach the rubber feet (x4) supplied to the base of
the Control Pad to prevent it from slipping.
54