Honda HS624 Dealer Instructions page 15

8. Check discharge deflector lever adjustment:
a. If the discharge deflector will not go to the HIGH
position when the lever is in the HIGH position,
adjust the cable as needed.
b. Make sure the discharge deflector gap is correct
between the discharge deflector and the chute, and
that the lever does not hit the control panel when
the lever is in the LOW position. Adjust stop if
necessary.
9. On Track-types: Check track tension.
a. With the snowblower resting on its tracks,
check track deflection by pressing down
midway between the wheels with a force of
15 kg (33 Ib).
CORRECT TRACK DEFLECTION
27 ~ 33 mm (1-1/16 ~ 1-5/16 in)
b. Adjust if necessary. Be sure to adjust both
sides evenly.
10.Check the security of all nuts and other fasteners.
Tighten if necessary.
HS624 • HS724 • HS828 • HS928 • HS1132 SNOWBLOWERS
DISCHARGE DEFLECTOR LEVER
HIGH
LOW
CABLE
LOCK
NUTS
DISCHARGE DEFLECTOR CABLE
DISCHARGE DEFLECTOR
STOP
27 ~ 33 mm
(1-1/16 ~ 1-5/16 in)
TRACK
TENSION BOLT
ADJUSTING NUT
DISCHARGE DEFLECTOR
HIGH
LOW
1 ~ 3 mm
(3/64 ~ 1/8 in)
CHUTE
DISCHARGE
DEFLECTOR
LEVER
CONTROL
PANEL
15 kg (33 Ib)
MORE
DEFLECTION
LESS
DEFLECTION
15 of 17