Panel Messages; Troublershooting - Vita Spa DUET Owner's Manual

COMMON PANEL MESSAGES
Message...
Pr
SL
EC
ST
IC
- -
Message Meaning
No message on
Display Power
has been cut
off to the spa
HH "Overheat"
- *One of the
sensors has
detected 118F
/ 47.8C at the
heater
* - Even when the spa is shut down, some equipment will turn on if freeze protection is needed.
VITA SPA DUET
What it is...
Priming mode
Sleep mode
Economy mode
Standard mode
Freeze condition
Water temperature
What Happens...
The spa will shut
down and will
automatically
reset once the
water tempature
has cooled to 108F
(42C)
What it means...
Spa is in normal Priming Mode operation
Spa is in normal Sleep Mode operation
Spa is in normal Economy Mode operation
Spa is in normal Standard Mode operation
Heater will come on to keep water above 45°F
Current water temperature not measured
Possible Causes
~ Low Water Flow
~ Faulty Equip-
ment
Action Required
Verify power going to
spa. Check for tripped
breaker or blown fuse.
The control panel will
be disabled until pow-
er returns. Spa setting
will be preserved until
the next power up.
DO NOT ENTER THE
WATER. Remove the
spa cover and allow
water to cool. ~
Verify all slice valves
are locked open ~
Verify Actual water
tempature with a
digital Thermom-
eter ~ Verify normal
operation of pump 1
~ Verify all spa jets are
open. Once the heater
has cooled, reset by
pushing any button. If
the spa does not reset,
shut off the power
to the spa and call
your dealer or service
organization.
25