S A F E T Y I N S T R U C T I O N S
For proper operation, only qualified and certified personnel should perform installation of this device. Do
•
not attempt installation and/or operation without proper knowledge how to do so. Any modifications to this
device will void the original manufactures warranty and increase the risk of damage and/or personal injury.
Air inlets must remain clean and never blocked. Device must be installed in a location with adequate
•
ventilation. Allow approx. 6" (15cm) between this device and other devices or a wall for proper cooling.
Always disconnect from main power source before performing any type of service and/or cleaning
•
procedure. Only handle the power cord by the plug end, never pull out plug by tugging wire the cord.
Do not operate device if the power cord has become frayed, crimped and/or damaged. If the power cord is
•
damaged, replace it immediately with a new one of similar power rating.
N E V E R
O P E N
•
This device is designed for INDOOR / DRY LOCATIONS ONLY.
•
DO NOT
operate device in locations with temperatures above 113°F (45°C) or below than 35.6° F (2° C).
•
DO NOT
operate device in locations with excessive dryness or humidity; ideal conditions are between 35%
•
and 80% RH (Relative Humidity).
DO NOT
operate device in areas subject to extreme vibrations or bumps.
•
Please make sure there are NO FLAMMABLE MATERIALS close to this device while operating, to
•
prevent any fire hazard.
Do not permit operation by persons who are not qualified for operating this type device. Most damages are
•
the result of operations by nonprofessionals.
Please use the original packaging and materials to transport this device in for service.
•
8
™
The eNODE 8
is an extremely sophisticated piece of electronic equipment. To
guarantee a smooth operation, it is important to follow the guidelines in this
manual. The manufacturer of this device will not accept responsibility for damages
resulting from the misuse of this device due to the disregard of the information
printed in this manual.
This device falls under PROTECTION CLASS 1. It's essential this device is
grounded properly, and only qualified personnel perform all electrical connections.
D E V I C E
W H I L E
w w w . e l a t i o n l i g h t i n g . c o m
I N
U S E !
eNODE
8
U ser
M anual
1 .0
™
Need help?
Do you have a question about the eNODE 8 Pro and is the answer not in the manual?