Tightening Torque - Hitachi G 18SS Service Manual

(6) Mount the cord clip as shown in Fig. 6 being careful of the direction.
Fig. 6
Cord dia.: Over 8.5 mm
Lubrication points and type of lubricant
Pinion chamber of the Gear Cover Ass'y [5] ---------COSMO MOLYBDEN NO. 2 60 g
Tapping Screws (W/Flange) D4 x 16 [45] [46] ------------- 2.0 ± 0.5 N
Seal Lock Screws (W/Sp. Washer) M5 x 14 (Black) [1] -- 4.9 ± 1.0 N
Tapping Screw (W/Flange) D5 x 35 (Black) [17] ---------- 3.4 ± 0.7 N
Hex. Socket Hd. Bolt (W/Flange) M5 x 16 [27] ------------- 7.8 ± 1.5 N
Special Nut M10 [6] ----------------------------------------------- 20.4 ± 3.1 N
Machine Screw M5 x 10 [20] ----------------------------------- 5.9 ± 1.5 N
Cord clip mounting diagram
Generously rub grease onto the gear, pinion and
inner circumference of the metal.

Tightening torque

-10-
Cord dia.: Max. 8.5 mm
m (20 ±5 kgf cm, 1.5 ± 0.4 ft-lbs.)
• •
m (50 ± 10 kgf cm, 3.6 ± 0.8 ft-lbs.)
• •
m (35 ± 7 kgf cm, 2.5 ± 0.5 ft-lbs.)
• •
m (80 ± 15 kgf cm, 5.8 ± 1.1 ft-lbs.)
• •
m (200 ± 30 kgf•cm, 14.4 ± 2.2 ft-lbs.)
•
m (60 ± 15 kgf cm, 4.3 ± 1.1 ft-lbs.)
• •