Table of Contents
Advertisement
Installation and Operating Instructions
To delete a segment for a camera:
1. Select the segment to delete.
2. Click the right mouse button to display the custom schedule popup menu.
3. Select Delete Segment(s) and Filter(s). If the deleted segment began at midnight
(00:00), the start time of the next later segment changes to midnight (00:00).
Otherwise, the next earlier segment replaces the deleted segment.
To delete all the segments for a camera:
1. Move the mouse pointer over the name of the camera with segments and filters to
delete.
2. Click the right mouse button to display the custom schedule popup menu.
3. Select Delete Segment(s) and Filter(s). The unit deletes all segments and filters
on the line.
Configuring an Active Segment
Use the Active Segment screen to configure both the record quality and the live filter
for the segment.
1. Define the segment (see
2. Use one of the following options to display the Active Segment screen:
• Double-click the segment to configure.
• Select the segment to configure; then click Setup.
• Select the segment to configure; then access the custom schedule popup menu
(see
NOTE: Before you can configure a live filter, you must record at least one image from
the camera. Until an image is recorded, the filter options are disabled.
66
Working with Schedule Segments
Custom Schedule Popup Menu
on page 60).
on page 62); then select Setup.
Setup Options
Advertisement
Table of Contents
