Installation and Operating Instructions
Add Volume
CAUTION: Do not attempt to add/remove/convert volumes to the database when
any of the following processes are running: Data lifetime, local or
remote search, export, or remote download. Doing so will likely crash
the Intellex or lead to other unexpected behavior.
Use the Add Volume screen to add volume information for the selected volume.
In the Label field, specify a label for this volume, using the virtual keyboard or an
attached keyboard, and in the Percent of space field, enter the amount of physical
drive space to use for this volume. The default is 100%.
Click OK to save the new volume information and return to the Storage Setup
screen. Click Cancel to exit this screen without saving any changes.
126
Setup Options