Installation and Operating Instructions
USB/RS-232 SINGLE COM PORT ADAPTER
NOTE: This is included with Premier models.
Connect the device to a USB port. The unit will recognize the device and a Files
Needed window then appears. Click on the Browse button, and in the Locate File
window use the Look In dropdown list to go to C:\winnt\system32\drivers; then
click the Open button and select OK in the Files Needed window. If the unit does not
locate the driver for the "Iogear USB COM Port", you may have to reload the driver.
The driver files can be found by double-clicking on My Computer and going to
C:\Drivers\Iogear\GUC232A\WIN2000.
200
Installation and Use of Accessories