Network Connection - HIKVISION DS-7300HWI-SH Series DVR Quick Start Manual

First Choice For Security Professionals

9. Network Connection

Network Connection
Using Web Browsers
All Hikvision products use the default IP address of 192.0.0.64
1. Connect a CAT5 or CAT6 cable from the DVR to a PC or Laptop computer.
Note your laptop or PC computers existing address, such as:
IP:
Subnet:
2. Open web browser.
3. In the address bar, type 192.0.0.64
If prompted, allow the installation of the Hikvision application.
It may be necessary to add this IP address as a Trusted Site with Low Security.
4. Login to the DVR:
Username: admin
Password: 12345
5. Go to the Configuration tab, then Remote Configuration, then [Network Settings]
6. Click on Network Settings.
7. Enter the IP address you wish the DVR to have, then SAVE.
8. Reset your laptop or PC to its original IP address, subnet and gateway.
9. Type the new address in web browser.
Using Hikvision iVMS-4200 client software
If possible, check http://www.hikvision.com
If internet access is not available, install the software from the CD.
Then follow the instructions included with the software.
192.0.0.62
255.255.255.0
for the latest version of the iVMS-4200 client software.