Channel Settings; Maintenance - IMG STAGE LINE TWIST-5LED Instruction Manual

128-191 Clockwise rotation (CW) rainbow effect from slow to fast
192-255 Counter-clockwise rotation (CCW) rainbow effect from slow to fast
Channel 7 – Gobo rotation
0-7 No Rotation
8-119 Clockwise rotation (CW) from slow to fast
120-231 Counter-clockwise rotation (CCW) from slow to fast
232-255 Gobo bouncing
Channel 8 – Prism
0-15 Open
16-255 3-facet Prism Effect

Channel settings

Maintenance

The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1. All screws used for installing the device or parts of the device have to be tightly connected and must
not be corroded.
2. There may not be any deformations on housings, fixations and installation spots.
3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
4. The electric power supply cables must not show any damages or material fatigue.
The IMG Stage Line TWIST-5LED Spot requires almost no maintenance. However, you should keep the unit
clean. Otherwise, the fixture's light-output will be significantly reduced.
supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass
cleaner and a soft cloth. Do not use alcohol or solvents.
smoke-fluid tends to build up residues, reducing the light-output very quickly.
The cooling-fans, colour-wheel, the gobowheel, the gobos and the internal lenses should be cleaned
monthly with a soft brush.
Please clean internal components once a year with a light brush and vacuum cleaner.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Disconnect the mains power
The front lens will require weekly cleaning, as
19
Fig. 6