Related Manuals for IMG STAGE LINE TWIST-5LED
Summary of Contents for IMG STAGE LINE TWIST-5LED
- Page 1 LED MOVING HEAD LYRE À LED MOVING-HEAD A LED TWIST-5LED Best.-Nr. 38.5980 BEDIENUNGSANLEITUNG • INSTRUCTION MANUAL • ISTRUZIONI PER L’USO VEILIGHEIDSVOORSCHRIFTEN • SIKKERHEDSOPLYSNINGER SÄKERHETSFÖRESKRIFTER • TURVALLISUUDESTA...
-
Page 2: Table Of Contents
TWIST-5LED Product Guide Warning.................…...……………..…………………………….………… Safety-instructions……………………………………………………………………………………………………… Operating Determinations.………………………………………………………………………………………….. Rigging.…………………………………………………………………………………………………………………… Return Procedure……………………………………………………………………………........Description................…...………………………………………….……….. Features and Overview ………………………………...….……………….………….……….……….…………… Backside…………………………………………………...…...….……………….…………………...………………. Installation................…...……………………………………………………. Set Up and Operation..............……..…………………………………………… Control Modes…………………………………………………………………………………………………….……. One TWIST-5LED (Built-in Programs)…..…………………………….……………….…………..…..………….. One TWIST-5LED (Sound Control)…………………………………………..…………………….……..………. Multiple (Master/Slave control).………………………………………………..……………… TWIST-5LEDs Multiple TWIST-5LEDs (DMX control)………………………………………………….…..………..……………. Fixture Linking…………………....……..……………………………………..…………………..…………..….. -
Page 3: Warning
Your shipment includes: • IMG Stage Line TWIST-5LED Spot with IEC powercable 0,9m • 1 bracket for truss mounting • Safety eye •... - Page 4 If your IMG Stage Line device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your dealer for service.
-
Page 5: Operating Determinations
When rigging, derigging or servicing the projector, always make sure, that the area below the installation place is blocked and staying in the area is forbidden. The TWIST-5LED can be placed on a flat stage floor or mounted to any kind of truss by a clamp. - Page 6 Mounting a clamp to the underside of the TWIST-5LED moving head Improper installation can cause serious damage to people and property ! Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.
-
Page 7: Return Procedure
Description of the device Features The IMG Stage Line TWIST-5LED Spot is a moving-head with high output and great effects. • DMX-control via standard DMX-controller • Built-in Automatic Programs + Built-in Sound activated programs • User-selectable Pan & Tilt ranges, 540° / 360° / 180°... -
Page 8: Backside
DMX signal connector (OUT) 3-pin Installation Remove all packing materials from the TWIST-5LED Spot. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 9: Control Modes
One TWIST-5LED (Sound-control) 1.Plug the end of the electric mains power cord into a proper electric power supply socket. Turn on the music. If the device is set to sound-control, then the TWIST-5LED will react to the beat of the music. -
Page 10: Multiple Twist-5Leds (Dmx Control)
Multiple TWIST-5LEDs (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. Always use a safety cable. 3. Use a 3-p XLR cable to connect the TWIST-5LEDs and other devices. 4. -
Page 11: Fixture Linking
DMX signal. Maximum recommended DMX data link distance: 100 meters Maximum recommended number of TWIST-5LEDs on a DMX data link: 30 fixtures The TWIST-5LED Spot can be operated with a controller in control mode or without the controller in stand-alone mode. -
Page 12: Control Panel
When using multiple TWIST-5LEDs, make sure you set the DMX addresses right. Therefore, the DMX address of the first TWIST-5LED should be 1(001); the DMX address of the second TWIST-5LED should be 1+13=14 (014); the DMX address of the third TWIST-5LED should be 14+13=27 (027), etc. -
Page 13: Menu Overview
Menu Overview... -
Page 14: Main Menu Options
Main Menu Options DMX address Built-in Programs Slow/Fast/Sound-control/Remote control/Slave Pan/Reverse Pan Tilt/Reverse Tilt Display/Reverse Display Advanced 13 channels/ Basic 8 channels Pan 540º, 360º, 180º Tilt 270º, 180º, 90º Reset Load factory default settings DMX Addressing With this menu you can set the DMX address. 1) Press Mode/Esc, until the display shows 2) Press Enter to confirm. -
Page 15: Built-In Programs Mode
Built-in Programs Mode You can select 5 different Programs when using the Giant LED. Press MODE until the display shows ,then press the UP / DOWN buttons to select all 5 programs. Built-in Program Slow When the display shows : ,then press ENTER. -
Page 16: Tilt Mode
Tilt Mode When the display shows : , the Tilt is 270º. When you press Up/Down and the display shows , the Pan is 180º. When you press Up/Down and the display shows , the Pan is 90º. Reset When the display shows : and you press ENTER the device will reset. -
Page 17: Dmx Channels
DMX Protocol 13 Channels ( Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be turned by 540° and stopped at any position you wish. Channel 2 –... - Page 18 48-55 Gobo 6 (Metal) 56-63 Gobo 7 (Metal) 64-71 Gobo Shake 7 from slow to fast 74-79 Gobo Shake 6 from slow to fast 80-87 Gobo Shake 5 from slow to fast 88-95 Gobo Shake 4 from slow to fast 96-103 Gobo Shake 3 from slow to fast 104-111...
-
Page 19: Channels (Basic)
DMX Protocol 8 Channels ( Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be turned by 540° and stopped at any position you wish. Channel 2 –... -
Page 20: Channel Settings
3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing. 4. The electric power supply cables must not show any damages or material fatigue. The IMG Stage Line TWIST-5LED Spot requires almost no maintenance. However, you should keep the unit clean. -
Page 21: Replacing The Fuse
1. Power supply. Check that the unit is plugged into an appropriate power supply. 2. The LEDs. Return the TWIST-5LED Spot to your IMG Stage Line dealer. 3. The fuse. Replace the fuse. See page 22 for replacing the fuse. - Page 22 Problem Probable cause(s) Remedy No power to the fixture · Check that power is switched on One or more and cables are plugged in. fixtures are Primary fuse blown. · Replace fuse. completely dead. Fixtures reset The controller is not connected. ·...
-
Page 23: Product Specifications
Product Specification Model: IMG Stage Line TWIST-5LED Spot Input Voltage: 100-240 VAC Peak Power 227 Watt; Continuous Power 185 Watt Fuse: F2A / 250V Dimensions: 210x225x340mm (LxWxH) Weight: 5,64 kg Operation and Programming Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+) - Page 24 ® MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany © Copyright by MONACOR INTERNATIONAL. All rights reserved. A-0000.99.01.12.2011...