Built-in Programs Mode
You can select 5 different Programs when using the Giant LED.
Press MODE until the display shows
Built-in Program Slow
When the display shows :
The device is now in a fast built-in program mode.
Built-in Program Fast
When the display shows :
The device is now in a slow built-in program mode.
Sound-controlled Mode
When the display shows :
The device is now sound-controlled and will react to the music.
Slave Mode
When the display shows :
The device is now a slave device. It will now react the same as its master.
Pan movement Mode
When the display shows :
When you press Up/Down. The display will show
Tilt movement Mode
When the display shows :
When you press Up/Down. The display will show
Display Mode
When the display shows :
When you press Up/Down. The display will show
Advanced/Basic Mode
When the display shows :
When you press Up/Down. The display will show
Pan Mode
When the display shows :
When you press Up/Down and the display shows
When you press Up/Down and the display shows
,then press the UP / DOWN buttons to select all 5 programs.
,then press ENTER. The display will show
,then press ENTER. The display will show
,then press ENTER. The display will show
, then press ENTER. The display will show
, the device is in normal Pan Mode.
, the device is in normal Tilt Mode.
, the device is in normal Display Mode.
, the device has 13 Channels.
, the Pan is 540º.
14
. The Pan function is reversed.
. The Tilt function is reversed.
. The Display function is reversed.
. The device now has 8 channels.
, the Pan is 360º.
, the Pan is 180º.
.
.
.
.