Connecting To The Wireless Network; Wireless Networks Scan - AMC Live User Manual

Connecting to the wireless network.

Power up the Radio
Please connect power cable and turn power switch on, wait about 15 seconds until
display lights up. In this moment displays shows:
After a few seconds, this indication will change to:
Note: If you would like to give your radio a static IP address then please look at the
"Network configuration" section under the 'Settings" guide in this manual.

Wireless networks scan

When the display shows <Scan for networks>, press the SELECT button on the
remote control or front panel. During the networks scanning radios display shows:
If wireless network is not found display shows this table:
If this happens then you have to get your wireless access point working - see the
instructions supplied with it. When the radio finds your wireless network, it displays
the ESSID for the access point on the screen - this is a name that is allocated to the
access point by the person who set up the network - for example:
Initialising network
Scanning
Scanning
No Wireless
Networks Found
My network