Basic Operations; Turning The Radio On/Off; Adjusting The Volume; Selecting A Zone - Hytera DMR Installation Manual

Basic Operations

Turning the Radio On/Off

To turn the radio on, hold down the Power On/Off key until
the following indications are given: the radio shows the
power-up screen and sounds power-up alert, and LED
flashes green.
To turn the radio off, long press the Power On/Off key.

Adjusting the Volume

When the Volume Control / Channel Selector knob
operates in volume adjustment mode (the radio displays
the icon ), rotate the knob clockwise to increase the
volume, or counter-clockwise to decrease the volume.
Alert tone volume is programmable by your dealer.

Selecting a Zone

A zone is a group of channels exhibiting the same
property, and is programmed by your dealer. The radio
supports up to 32 zones, each with a maximum of 16
channels. You may select a zone through any of the
following methods:
1. Through menu selection
Go to the Zone menu, and use the Up/Down keys to select
your desired zone.
2. Through the function keys
You may quickly toggle to your desired zone, through
press of the programmed Zone Up or Zone Down key.
Note: You dealer may designate the power-up
zone and channel. If not, the radio will enter the
zone and channel last used.

Selecting a Channel

Press the Volume Control / Channel Selector knob to
switch it to channel selection mode (the radio displays the
icon ), and then rotate the knob to select your desired
channel.
Alias of the current channel will appear on the standby
screen.
Note: The knob is in volume adjustment mode by
default, and will return to this mode in 5 seconds
after you select a channel.

Digital/Analog Switch

Each channel can be programmed as either analog
channel or digital channel. If the current zone includes
both analog and digital channels, you may quickly switch
between digital and analog channels through the Volume
Control / Channel Selector knob.
When switching from digital to analog mode, some
features such as Message will be unavailable.
8