Omron F39-MC11 Instruction Manual page 17

①
Auxiliary output
3.AUX
②－１ ②－２
Dark ON
Light ON
1.D.ON 2.L.ON
②－７ ②－６
Specified beam Blanking monitor
7.SPC
（Only when ②－７ is
③－１（from ②－７）
selected, go to ③－１）
Beam select (Teach)
③－２
Send to sensor ENT:Beam(s) selected
SEND
CLR:Clear selected
③－２－１
Setting completed ③－１－１
GOOD
Error
ERR
Go to ①
after 1 sec.
- 25 -
[Enter] Key
Blinking
[Cancel] Key
[Up][Down] Key
②－３ ②－４
Light diagnosis Lockout
3.L.DG
②－５
Outermost beam monitor
6.BLN
When "teached", blocked
beams are selected.
Note: When "Enter" key
pressed with no blocked
beams, "Err" is displayed.
beam(s)
GOOD
OR
ERR
Go to ③－２
after 1 sec.
①
Output #2
3.OU２
②－１
Dark ON
1.D.ON
4.L.OU
②－７
Specified beam
7.SPC
5.O.B.M.
（Only when ②－７ is
selected, go to ③－１）
③－２
Send to sensor
SEND
③－２－１
Setting completed
GOOD
Error
ERR
Go to ①
after 1 sec.
[Enter] Key
Blinking
[Cancel] Key
[Up][Down] Key
②－２ ②－３
Light ON Light diagnosis
2.L.ON 3.L.DG
②－６
Blanking monitor
6.BLN
③－１（from ②－７）
When "teached", blocked
Beam select (Teach)
beams are selected.
Note: When "Enter" key
pressed with no blocked
beams, "Err" is displayed.
ENT:Beam(s) selected
CLR:Clear selected
beam(s)
③－１－１
GOOD
OR
ERR
Go to ③－２
after 1 sec.
- 26 -
②－４
Lockout
4.L.OU
②－５
Outermost beam monitor
5.O.B.M.