Audio System; (If Equipped) - Mitsubishi MIRAGE 2014 Owner's Handbook Manual

8

AUDIO SYSTEM

B
D
To enter frequencies into the memory (AM/FM)
1. Press A to turn on the audio system.
2. Press B to select the desired band (am/fm).
3. Press C to seek station
4. hold down one of the memory select buttons D (1-6) until it
beeps in order to save that station to memory.
audio Remote
VOLUME
control button

(if equipped)

SEEK
change
station or
track
VOLUME
NOTE: Please refer to your owner's manual for more detailed
information on how to use your audio system.
C
A
UP
MODE
change the
audio source
Down
Usb and iPod input (if equipped)
To connect a USB memory device
1. Park your vehicle in a safe place and turn
the ignition switch to the "off" position
or put the operation mode in off.
2. open the glove compartment and remove
the connector cable A , B from clips C .
3. connect a commercially available Usb
connector cable D to the Usb memory
device E .
4. connect the commercially available
Usb connector cable D to the vehicle's
connector cable B . be sure to hold the
terminal part A of the connector cable as
shown in the illustration.
5. fix the connector cable A , B on the clips.
To remove
1. turn the ignition switch to the "off"
position or put the operation mode in off.
2. Remove the commercially available Usb
connector cable D . be sure to hold the
terminal part A of the connector cable as
shown in the illustration.
3. fix the connector cable on the clips and
close the glove compartment.