Starting Up/Shutting Down - Panasonic CF-29 Series Operating Instructions Manual

Starting Up/Shutting Down

Starting Up
Latch
3
2
1
Power Indicator
Power Switch
POWER
1
Open the display.
1 Pull the carrying handle forward.
2 Press the latch as illustrated.
Lift up the latch and open the display.
3
2
Turn your computer on.
Slide the power switch and hold it for approximately one second until the power indicator
turns on before releasing it.
CAUTION
When the AC adaptor is not connected, the power will not go on if the display is
closed.
While booting, avoid the following until the hard disk drive indicator
off.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad, touchscreen (only for models with touch-
screen), or external mouse operations.
• Closing the display.
Once the computer is powered off, you must wait at least ten seconds before pow-
ering it on again.
When the CPU temperature rises, the computer may not power on to prevent the
CPU from overheating. Should this happen, allow the computer to cool down then
switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
NOTE
When the power is turned on in a low-temperature environment, sometimes the
message "Warming up the system. Please wait..." is displayed (up to 20 minutes) or
the battery indicator alternately blinks green and orange. This function is designed
to prevent hard disk drive malfunctions that may occur at low temperatures. Wait
for the computer to start up.
3
Log on to Windows.
After confirming that the hard disk drive indicator
input the password, then select
not operate.
4
Select your application.
You are able to start working on your computer.
has turned off, select the user and
. Until the correct password is entered, the computer will
has turned
17