Shutting Down; Battery Indicator - Panasonic CF-29 Series Operating Instructions Manual

Dealing with Problems (Summary)
Display (continued)
An afterimage appears (e.g.,
green, red, and blue dots re-
main on the display) or there
are dots not displaying the
correct colors
The screen becomes disor-
dered
The external display no
longer displays properly
When you want to display
the fonts or icons at a larger
size
During simultaneous dis-
play, one of the screens be-
comes disordered
When a video such as an
MPEG file is being played
with Media Player, the dis-
play destination cannot be
switched using Fn + F3
When the screen saver is set,
an error occurs during a re-
sume operation

Shutting Down

Windows cannot be shut
down or restarted

Battery Indicator

The red indicator lights
The red indicator blinks
The green indicator blinks*
30
If an image is displayed for a prolonged period of time, an afterimage may appear. This is
not a malfunction. The afterimage will disappear when a different screen is displayed.
High-precision and advanced technologies are necessary in the production of color liquid
crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either
fail to light or remain constantly lit (that is, more than 99.998% of elements are function-
ing properly), no defect is considered to exist.
The screen display may become distorted if the resolution or number of colors is changed,
or if an external display is connected or disconnected while the computer is operating.
Restart the computer.
When an external display not compatible with the power saving mode is used with the
computer, the display may not function correctly when the computer enters the power
saving mode. In such cases, turn off the power to the external display.
Change the size of the icons, etc. using "Icon Enlarger" (
To enlarge a part of the screen, use Loupe Utility (
Try changing the display by pressing Fn + F3 .
If you continue to experience problems, try changing the display destination in the follow-
ing menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mo-
bile] - [Devices]
When the [Command Prompt] is set to "Full Screen" by pressing Alt + Enter , the
picture is displayed on one of the screens only. When the window display is restored by
pressing Alt + Enter , the picture is displayed on both screens.
The display destination cannot be switched while a video such as an MPEG file is playing.
Stop playing the moving picture before switching the display destination.
When the computer automatically enters the standby or hibernation mode while the screen
saver is running, an error may occur during a resume operation. In such cases, turn off the
screen saver or try changing the pattern of the screensaver.
If a USB device is connected, try removing it.
It may take one or two minutes to shut down.
The battery level is very low (the charge is approx. 9% or less).
Connect the AC adaptor. You can use the computer when the battery indicator light is
orange. If you do not have an AC adaptor, save your data and power off your computer.
After replacing the battery pack with a fully charged one, turn your computer on.
Quickly save your data and power off your computer. Remove the battery pack and dis-
connect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support. The battery pack or charg-
ing circuit may be defective.
1 In high temperature mode, the battery is discharging to the level that corresponds to an
80%* 2 charge for normal temperature mode. (
move the battery pack while the battery indicator is blinking green. If you remove it, the
power will be turned off forcibly.
* 1 Only for the main battery pack.
* 2 In high temperature mode, the level that corresponds to an 80% charge for normal temperature
mode is displayed as [100%].
"Icon Enlarger").
"Loupe Utility").
"Battery Power") Do not re-