Using Menu For Detailed Adjustment - JVC GR-SXM25 Instructions Manual

24
EN
Select Dial
Display
(ex. Menu Screen available
using the MENU Button)
4
NEXT
M . W . B . AUTO
D . ZOOM ON
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
S TAPE AUTO
4
RETURN
4
BACK
REC. TIME OFF
INT. TIME OFF
TALLY LAMP ON
JLIP ID NO 06
DEMO MODE OFF
4
RETURN
REC TIME
OFF
1/4S
1/2S
1 S
5 S
EXIT
4
BACK
REC. TIME 1S
INT. TIME OFF
TALLY LAMP ON
JLIP ID NO 06
DEMO MODE OFF
4
RETURN
Normal Screen
NOTE:
No menu functions except "FOCUS" and
"EXPOSURE" are available while in the Record
mode.
RECORDING
MENU Button
Menu Screen 1
Menu Screen 2
Setting Menu
(ex. REC TIME)
Advanced Features (cont.)

Using Menu For Detailed Adjustment

This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
1
SELECT OPERATION MODE
Turn the Power Switch to "PRO.".
2
ACCESS MENU SCREEN
Menu access depends on the function you select.
If you select the functions from the "Menu Screen
Available Using The Select Dial" described on
pg. 25 . . .
.... press the Select Dial. The Menu Screen appears.
If you select the functions from the "Menu Screen
Available Using The MENU Button" described on
pg. 25 and 26 . . .
.... press MENU. The Menu Screen appears.
3
SELECT FUNCTION
Rotate the Select Dial to place the highlight bar on
the desired function.
•To go from Menu Screen 1 to Menu Screen 2, rotate the
Select Dial to "NEXT" and press it. To go back to Menu
Screen 1 from Menu Screen 2, rotate the Select Dial to
"BACK", and press it.
•If the setting you want cannot be found in the Menu
Screen, place the highlight bar on "RETURN", then go
to step 6.
4
MAKE SETTING
Press the Select Dial. The setting procedure depends
on the function you select.
If you select "FOCUS", "EXPOSURE", "TITLE",
"DATE/TIME DISP." or "DATE/ TIME" . . .
.... see respective pages (FOCUS:
EXPOSURE:
DATE/TIME DISP.:
If you select "WIDE", "D.ZOOM", "TELE MACRO"
or "DEMO MODE" . . .
.... the selected function's parameter starts blinking.
Rotate the Select Dial until the desired parameter
appears. Go to step 5.
If you select "JLIP ID NO." . . .
.... press the Select Dial so that the number blinks, then
rotate it until the desired number appears, and press
it. Then rotate the Select Dial to move the highlight
bar to "EXIT".
If you select any other functions . . .
.... rotate the Select Dial to move the highlight bar to the
desired setting.
• If you decide you want to return to the previous
setting, rotate the Select Dial to move the highlight
bar to "EXIT".
5
END SETTING
Press the Select Dial. The Menu Screen reappears
with the highlight bar on "RETURN".
6
CLOSE MENU SCREEN
Press the Select Dial. The normal screen reappears.
pg. 28, 29,
pg. 27, TITLE: pg. 23,
pg. 22, DATE/TIME: pg. 7).