JVC GR-SXM161 Instructions Manual page 22

DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
or " " and "DEMO MODE" is set to "ON" (factory-
preset). Performing any operation during the
demonstration stops the demonstration
temporarily. Set to OFF to stop completely.
• When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic
Demonstration activated on the LCD monitor or
viewfinder.
DATE/TIME
Allows you to set the current date and time.
( pg. 7)
To adjust the brightness of the LCD monitor,
@
is set to " " perform the following steps quickly (within approx.
1 second by each interval):
1) Select "LCD BRIGHT" in SYSTEM MENU. The
2) Press the BRIGHT Wheel
3) Rotate the BRIGHT Wheel
4) Rotate the BRIGHT Wheel
22
LCD BRIGHT
"BRIGHT ON" message appears.
normal screen.
bright level indicator
appropriate brightness is reached. After the
1
BRIGHT Wheel is released, the indicator
soon disappears and adjustment is completed.
1
in to return to
1
to display the
h
.
1
until the