Apm Configuration - Asus M4A89GTD PRO User Manual

3.7.5

APM Configuration

APM Configuration
EuP Ready
Restore on AC Power Loss
Power On By PCI/PCIE Device
Power On By PS/2 Devices
Power On By Ring
Power On By RTC Alarm
EuP Ready [Disabled]
[Disabled]
[Enabled]
Restore On AC Power Loss [Disabled]
[Power On]
[Disabled]
[Last State]
Power On By PCI/PCIE Device [Disabled]
[Disabled]
[Enabled]
Power On By PS/2 Devoces [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By RTC Alarm [Disabled]
[Disabled]
[Enabled]
3-30
BIOS SETUP UTILITY
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Disables the Energy Using Products (EuP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for
the EuP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the PME to wake up from S5 by PCI/PCIE devices.
Allows you to turn on the system through a PCI/PCIE LAN or modem card.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Disables the Power On by a PS/2 devices.
Enables the Power On by a PS/2 devices. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and System
Time will become user-configurable with set values.
Power
Chapter 3: BIOS setup