Boot Settings Configuration - Asus M4A89GTD PRO User Manual

1st – xxth Boot Device [Removable Dev.]
These items specify the boot device priority sequence from the available devices. The number
of device items that appears on the screen depends on the number of devices installed in the
system. Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
•
•
3.8.2

Boot Settings Configuration

Boot Settings Configuration
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'DEL' Message Display
Quick Boot [Enabled]
[Disabled]
[Enabled]
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
AddOn ROM Display Mode [Force BIOS]
[Force BIOS]
[Keep Current]
Bootup Num-Lock [On]
[Off]
[On]
Wait For 'F1' If Error [Enabled]
[Disabled]
[Enabled]
Hit 'DEL' Message Display [Enabled]
[Disabled]
[Enabled]
3-34
To select the boot device during system startup, press <F8> when ASUS Logo appears.
To access Windows OS in Safe Mode, do any of the following:
- Press <F5> when ASUS Logo appears.
- Press <F8> after POST.
BIOS SETUP UTILITY
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
When set to [Disabled], BIOS performs all the POST items.
When set to [Enabled], BIOS skips some power on self tests (POST) while
booting to decrease the time needed to boot the system.
Enables the full screen logo display feature.
Disables the full screen logo display feature.
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Sets the power-on state of the NumLock to [Off].
Sets the power-on state of the NumLock to [On].
Disables this function.
The system waits for the <F1> key to be pressed when error occurs.
Disables this function.
The system displays the message "Press DEL to run Setup" during POST.
Boot
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Chapter 3: BIOS setup