Using The Ati ® Catalyst ® Control Center - Asus M4A89GTD PRO User Manual

5.2.4 Using the ATI
Using an add-on graphics card
1. Install a graphics card onto your motherboard. Refer to the User Guide that comes with
your graphics card for details.
2. Right-click on the Windows
then click ATI CATALYST(R) Control
Center from the shortcut menu. The
ATI CATALYST Control Center screen
appears.
Click Graphics Settings >
3.
CrossFire™, then select the Enable
CrossFire™ check box. When a
confirmation message pops up, click
Yes. The screen blacks out for about
one minute.
Click OK. The add-on graphics card is
4.
set to be the main monitor.
Using the onboard graphics card
1. Right-click on the Windows
Center from the shortcut menu. The ATI CATALYST Control Center screen appears.
Click Graphics Settings > CrossFire™,
2.
then clear the Enable CrossFire™
check box. When a confirmation
message pops up, click Yes. The screen
blacks out for about one minute.
Click OK.
3.
ASUS M4A89GTD PRO
CATALYST Control Center
® ®
desktop,
®
desktop, and then click ATI CATALYST(R) Control
®
5-5