Recommended Segway PT Maintenance Schedule
Product:
Serial Number:
Inspected By:
Monthly Checks
Check LeanSteer installation and torque – 11 N-m
Check tire wear and pressure – i2 = 15 PSI; x2 = 4 PSI
Ensure rider mats are intact, secured, and free of debris
Inspect handle bar grips for proper installation excessive wear
Inspect docking station for condition and functionality
Inspect fenders for cracks and obstructions
Check operation of height adjustment knob
Power on PT. Ensure operability and document hours/miles
Quarterly Checks
Check torque of all Fasteners: *Note: Only check with proper torque tool
Perform all monthly checks
Handle bar clamp = 6 N-m
InfoKey dock = 2 N-m
Batteries = 1.6 N-m
Wheel = 30 N-m
Fascia/Parking stand = 1.5 N-m
Gearbox Trim = 6 N-m
Fender = 1.5 N-m
Check InfoKey operation for proper functionality
Check InfoKey battery level (see PT Reference Manual)
Inspect LeanSteer for damage
Semi-Annually
Perform monthly and quarterly checks
Replace tires and handle bar grips as required
Test ride PT, note any wheel alignment, drift, or performance issues
Annually
Perform monthly, quarterly, and semi-annual checks
Dealer to inspect elastomer and coupling as outlined in SB10-001
Replace components and update software as necessary, factory
technicians only
© 2011 Segway Inc. All rights reserved.
September 2011
Date:
Mileage:
Hours:
Perform Function Checks
11
Circle Accordingly
Yes
No
Repaired
Yes
No
Repaired
Yes
No
Repaired
Yes
No
Repaired
Yes
No
Repaired
Yes
No
Repaired
Yes
No
Repaired
Yes
No
Repaired
Circle Accordingly
Checked
Did not check
Checked
Did not check
Checked
Did not check
Checked
Did not check
Checked
Did not check
Checked
Did not check
Checked
Did not check
Checked
Did not check
Checked
Did not check
Checked
Did not check
Circle Accordingly
Yes
Checked
Yes
Circle Accordingly
Yes
Yes
Yes
Segway PT Preventive Maintenance Guide
Replaced
Replaced
Replaced
Replaced
Replaced
Replaced
Replaced
Replaced
No
Replaced
No
No
No
No
22743-00001 ab
Need help?
Do you have a question about the i2 and is the answer not in the manual?