Replacement Parts And Deliming Products - John Wood POWER VENTED GAS FIRED WATER HEATER Installation And Operating Instructions Manual

Power vented gas fired water heater
Table of Contents

Advertisement

Natural gas and Propane main
burner with igniter assembly for
40k to 50k Btu/hr models
34
32
33
Figure 6
Natural gas and Propane
main burner with igniter
assembly for 60k to 75k
Btu/hr models
32
34
33
41
Figure 7
17
Figure 8
35
41
40
35
40
22
23
24
36
37
38
Figure 9
39
Vacuum relief valve
install per local
codes (not supplied
with heater).
Figure 10
*
Items not supplied with the water heater
** The side recirculation loop connections may not be used
as the primary water inlet and outlet connections. For
36
your convenience, plugs are installed in these fittings
at the factory. Remove these plugs if needed for your
37
specific installation. Otherwise (as with all connections)
check for leaks while filling the tank with water and after
completing the installation.
*** Caution: harness has 120 VAC present during opera-
38
tion.
39
Replacement Parts And Deliming
Products
Replacement parts and recommended delimer may be
ordered through authorized servicers or distributors. When
ordering parts, provide complete model and serial numbers
(see rating plate), quantity and name of part desired. Standard
hardware items may be purchased locally.
– 9 –
25
26
27
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

40 gal.50 gal.60 gal.75 gal.

Table of Contents