Connections - JVC GR-DX25 Instructions Manual

Connections

1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as shown
in the illustration.
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input, referring to
your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen ( pg. 23, 25).
Or, press DISPLAY
turn on/off the date indication.
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 24, 25).
• Indications other than date/time and time code
..... set "ON SCREEN" to "LCD", "LCD/TV" or "OFF" in
the Menu Screen (
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video
cable.
To monitor the picture and sound from the camcorder
without inserting a tape, set the camcorder's Power
8
Switch to " " or "
appropriate input mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound when the
camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.
If no image is displayed or no sound is heard from the TV,
set "S/AV INPUT" to "OFF" in the Menu Screen
(GR-DX55/DX35 only,
While the S-Video/Audio/Video/Editing cable is connected
#
to the S/AV connector
the speaker.
Q
on the remote control to
pg. 23, 25).
pg. 7).
", then set your TV to the
pg. 24).
, sound cannot be heard from
#
To S/AV
S-Video/Audio/Video/Editing
cable (provided)
Not
connected
"Y/C"/"CVBS"
video out
select switch
To TV or VCR
VCR
* When connecting the cables, open this cover.
** The audio connection is not required for watching still
images only.
*** Connect when the S-Video connection is not used.
Connector
cover*
To AUDIO**, VIDEO***
and -IN connectors
If your VCR has the SCART
connector, use the provided
cable adapter.
TV
TAPE PLAYBACK
EN
15