4.2.2 Selecting the Parameters
After accessing Setup as explained in the section
Accessing Setup (Section 4.2.1), the machine will
print the first main menu.
The following two alternatives are available:
1. Pressing key 2 - JOURNAL (select the menu), the
machine will print the first parameter of this menu.
2. Pressing key 1 - RECEIPT (do not select the
menu), the machine will print the second main
menu.
If you proceed with step 1, the following two
alternatives are available:
a. Pressing key 2 - JOURNAL , the machine will print
the second main menu.
b. Pressing key 1 - RECEIPT, the machine will print
the successive parameter.
...... and so on.
In brief:
1. In the Setup mode, the machine will print and
propose one item or parameter at a time.
2. The item or parameter can be accepted and
selected with key 2 - JOURNAL or rejected with
key 1 - RECEIPT.
XYAA6336
Service Manual
4-3