Changing the floppy disk drive
1
Open the system unit (see "Opening the system unit").
2
Pull the data and the power supply connectors from the floppy disk drive (1).
3
Remove the screws (2) on the left side of the floppy disk drive.
1
4
Remove the screws (1) on the right side of the floppy disk drive.
You may need to remove the USB front panel (see "Removing a USB front panel") before you
can remove the screws on the right side of the floppy disk drive.
5
Slide the drive carrier out of the system unit in the direction of the arrow.
36
1
2