Fiat Idea Owner's Handbook Manual page 29

12h/24h clock mode
This function is used to select 12h or 24
h display.
To carry out the adjustment, proceed as
follows:
– briefly press MODE: either 12h or 24h
will start flashing on the display (accord-
ing to the previous setting);
– press button + or – for setting;
– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.
Set date
This function is used to set the date (year
– month – day).
Proceed as follows to update:
– briefly press button MODE: "year" will
start flashing on the display;
– press button + or – to set;
28
– briefly press button MODE: "day" will
start flashing on the display;
– press button + or – to set;
– briefly press button MODE: "day" will
start flashing on the display;
– press button + or – to set.
Note The setting will increase or decrease
by one unit each time + or – is pressed.
Hold the button pressed to in-
crease/decrease the setting rapidly. When
the desired value is reached, end adjust-
ment with a single press.
– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.
Unlocking the doors and the
tailgate (key)
This function is used to: unlock the front
and rear doors, unlock the driver's side
door or all the doors including the tailgate.
Proceed as follows to set:
– briefly press button MODE: "Open
doors", "Open driver", "Open all";
– press button + or – to select. The se-
lected item will blink.
– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.