Table of Contents
Advertisement
■
AC adapter
Do not use at other voltages than the specified power supply voltage. Doing so might cause fire,
overheating, or electric shock. Use only a domestic 100 VAC power supply for use in Japan.
Firmly insert the AC adapter's power plug into the power outlet down to the base of its pins.
Incomplete insertion of the power plug might result in electric shock or fire caused by overheating
and fire. Do not use damaged AC adapters or loose power outlets.
If you hear thunder, do not touch the AC adapter's power plug. Doing so might cause an electric
shock as a result of a lightning strike.
When the AC adapter is not to be used for a long time, disconnect the AC adapter's power plug
from the power outlet. Failure to do so might cause electric shock, fire or a fault.
Do not use in places subject to direct splashing with water, pet urine or other liquids. Doing so
might result in faults resulting from overheating, fire, electric shock, or short-circuiting of electronic
circuits. In the event that the product is splashed with liquid, immediately disconnect the AC
adapter's power plug.
Do not use in humid places such as bath areas, or connect/disconnect the AC adapter with wet
hands. Doing so might cause electric shock or a fault.
Handling precautions
These precautions are provided to ensure that performance can be fully demonstrated.
Thoroughly read these precautions to ensure correct use.
■
Precautions common to the main unit, battery pack, charging equipment, peripheral
devices
●
Exerting unnecessary force on the product might damage the display, internal PCBs and other
components, and result in a fault. When putting the product inside a briefcase, take care not to place
heavy objects on top of it. Damage such as this is not covered by the warranty even if there is no external
visual damage.
●
Do not forcefully press your fingernails and sharp or hard objects against keys or display surface. Doing
so might cause scratching or damage.
Operate the display by directly touching it with the stylus pen (provided).
The touch panel has been designed to be lightly touched by the tip of the stylus pen (provided).
Operations cannot be done on the touch panel except with the stylus pen (provided). Do not touch it with
your fingers or other pens, or press fine-tipped objects (e.g. fingernails, ballpoint pens, pins) against it.
The touch panel might not function if it is touched in the following instances. Doing so might also cause it
to malfunction.
・ W hen operated with foreign objects placed on the operation screen
・ W hen operated with protective sheets, stickers, etc. attached
・ W hen operated with water droplets or condensation on the display
●
Avoid extremely hot, cold and humid places. (Use within an ambient temperature range of 5
humidity range of 35% to 85%.)
●
Do not use in places subject to lots of dust or vibration.
●
Wipe off any dirt with a soft, dry cloth. Do not use benzene, thinner, alcohol, detergent, and other solvents.
Doing so might deform the outer casing or spoil lettering.
8
Mishandling might cause overheating, fire, electric shock, etc.
Be sure to read the following warnings before use.
Mishandling might cause overheating, fire, electric shock, etc.
Be sure to read the following cautions before use.
℃
℃
to 35
and
Advertisement
Table of Contents
