Table of Contents
Advertisement
Quick Links
Instruction Manual
biblio Leaf
Use only the stylus pen (provided) to operate
the touch panel!
Do not use fingers or other pen-shaped objects.
SP02
Safety
Precautions
Table of
Contents
Preparing
for Use
Basic
Operations
My Library
(Electronic Books)
LISMO Book Store
Applications
Settings
Software
Update
Appendix
Advertisement
Table of Contents
Summary of Contents for Biblio Leaf SP02
- Page 1 Instruction Manual biblio Leaf SP02 Safety Precautions Table of Contents Preparing for Use Basic Operations My Library (Electronic Books) LISMO Book Store Applications Settings Software Update Appendix Use only the stylus pen (provided) to operate the touch panel! Do not use fingers or other pen-shaped objects.
-
Page 2: Preface
Preface Thank you for buying the biblio Leaf SP02 (simply called the "product" from here on). Before using the product, be sure to read the "Instruction Manual" (this manual) to ensure correct use. After you have finished reading this manual, be sure to store it in a safe place so that you can retrieve it whenever needed. -
Page 3: Regarding Notations Used In This Document
Regarding notations used in this document ■ Key indications used in this manual Icons used for keys in this manual are as follows. ■ Indications used for the operation of selecting items/icons/buttons, etc. Notations used for operation procedures in this manual are as follows. "Tapping"... - Page 4 ■ Exemptions ◎ The Company is not liable for any damages arising from earthquakes, lightning, storms, floods or other natural disasters, as well as fires, actions by third parties, other accidents, intentional or mistaken misoperation by the customer, or use under other unusual conditions outside the responsibility of the Company.
-
Page 5: Safety Precautions
Safety Precautions ■ Be sure to read these Safety Precautions to ensure safe use. These "Safety Precautions" describe instructions that should be observed to prevent damage to property or injury to the customer or others using the product. These instructions are divided into the following categories. ■... - Page 6 ■ Precautions common to the main unit, battery pack, charging equipment, peripheral devices Be sure to read the following hazards before use. Be sure to use only the exclusive peripheral devices. Use of other peripheral devices might cause overheating, fire, rupture, fault, or leakage of liquid. Do not use or leave in places that get hot (near naked flames, near stoves, under the blazing sun, etc.) or in places where flammable gases are generated, for example, while filling up with gasoline at a gasoline stand.
- Page 7 If you feel any abnormality with your skin, immediately consult a dermatologist. Itching, rashes, eczema, etc. sometimes occurs depending on your physical constitution and condition. The materials of parts used on the product are as follows. ● biblio Leaf SP02 main unit Location used Material used Surface processing...
- Page 8 ■ Main unit Be sure to read the following warnings before use. Use of the main unit in an automobile sometimes affects on-vehicle electronic devices, though this rarely happens. If this happens, stop use since this may impair safe travel. Use of electronic devices that emit radio waves in an aircraft is prohibited by law.
-
Page 9: Handling Precautions
■ AC adapter Mishandling might cause overheating, fire, electric shock, etc. Be sure to read the following warnings before use. Do not use at other voltages than the specified power supply voltage. Doing so might cause fire, overheating, or electric shock. Use only a domestic 100 VAC power supply for use in Japan. Firmly insert the AC adapter's power plug into the power outlet down to the base of its pins. - Page 10 ● Use as far away as possible from land-line phones, TVs and radios. Use nearby might affect them. ● The product may become warm while charging or during other operations, depending on the situation, but this is not abnormal. ● When the product is used by a child, parents or guardians should thoroughly read the “Instruction Manual”...
- Page 11 ■ Book cover ● Wipe off any dirt or water with a soft, dry cloth. Rain, sweat, or skin oil may cause stains or change the color. ● May change color depending on the conditions and environment in which it is used. ■...
-
Page 12: Using The Wireless Lan Function
■ Backup content on the product ● Please back up important content recorded or downloaded to the product to an outside source. Content recorded to memory on the product sometimes disappears or is altered by unexpected factors, such as static electricity or a fault, repair, mishandling, etc. * Backup method: Save important data to a microSD card or other storage media. - Page 13 1. Before using this product, make sure that "other wireless stations" are not in operation nearby. 2. In the event that instances of radio wave interference have occurred between this product and "other wireless stations", immediately either relocate this product or stop operation of the device (stop emission of radio waves).
-
Page 14: Table Of Contents
Table of Contents Preface .................................1 Safety precautions ............................1 When using the product ..........................1 Regarding notations used in this document ....................2 Safety Precautions ....................4 Handling precautions ..........................8 Using the wireless LAN function ......................11 Frequency band ............................11 Precautions about wireless LAN ........................11 Table of Contents ....................13 Preparing for Use ....................15 Accessories and main peripherals ...................... - Page 15 LISMO Book Store .....................33 LISMO Book Store signing procedure .....................33 Using the LISMO Book Store ........................34 Displaying My Page .............................34 Applications .......................35 Notes ................................35 Using the keyboard to enter ........................35 Using the stylus pen to enter ........................36 Viewing/editing notes ..........................36 Moving notes ..............................37 Deleting notes .............................37 Drawings ..............................38 Drawing drawings ............................38 Viewing/editing drawings ..........................38 Moving drawings ............................39 Deleting drawings ............................39...
-
Page 16: Preparing For Use
Accessories and main peripherals Before you start using the product, make sure that you have all the following packaged with the product. ■ Main unit biblio Leaf SP02 (including battery pack, battery cover, and warranty card) ■ Accessories Stylus pen Instruction Manual... -
Page 17: Names And Functions Of Parts
Names and functions of parts ① Stylus pen holder Used for stowing the stylus pen ② 6 (zoom in key)/ 7 (zoom out key) Resizes the font when you are viewing an electronic book. ③ 8 (power key) Pressing this key quickly activates/exits the screensaver. Holding this key down turns the power on/off. -
Page 18: How To Use The Earphone
How to use the earphone You can hear sound played back from electronic books on an earphone (sold separately) connected to the earphone terminal on the product. Insert the earphone's plug into the earphone terminal on the product Inserting/removing the battery pack and battery cover Before inserting/removing the battery pack and battery cover, be sure to turn the power off. - Page 19 Insert the battery pack With the surface of the battery pack marked [+][–] facing up, align the terminals of the battery pack with the terminals on the main unit, and insert the battery pack in the direction of the arrow. Check the shape of the battery pack, and insert it making sure that it is facing the correct way.
-
Page 20: Removing A Battery Pack
Removing a battery pack Push down the knob on the back of the main unit Knob With your finger held against the battery cover, lift up the battery cover in the direction of the arrow Remove the battery pack Lift up the battery pack in the direction of the arrow using the protrusion on the battery pack. -
Page 21: Charging The Battery Pack
Charging the battery pack There are two ways of charging the battery pack, charging by the AC adapter and by charging from a PC. Charging by the AC adapter The following describes how to charge the battery pack using the AC adapter (provided) and USB cable (provided). -
Page 22: Setting Power Save
Insert the smaller end of the USB cable into the USB connector on the product Insert so that it is horizontal with the connection terminal while checking the orientation of the terminal. During charging, the charging LED lights red and changes color to blue when charging is completed. -
Page 23: Basic Operations
Basic Operations How to use the touch panel/stylus pen You can operate the product's display (touch panel) by lightly touching it with the tip of the stylus pen (provided). ■ Cautions when using the touch panel The touch panel has been designed to be lightly touched by the tip of the stylus pen (provided). -
Page 24: Activating The Screensaver (Sleep Mode)
Activating the screensaver (sleep mode) You can activate the screensaver (sleep mode) to save battery power. Press 8 (power key) The screensaver is activated. To exit the screensaver, press 8 (power key) again. ◎ Note that pressing and holding 8 (power key) turns the power off. ◎... -
Page 25: Icons
Icons The following icons are displayed at the top of the screen. ① Displayed when a microSD card is inserted. You can check microSD card usage and remaining amount of space on the card by tapping this icon. ② Displays the reception of the 3G network being accessed. Strong Moderate Weak... -
Page 26: Entering Text
Entering text The product has a software keyboard and a QWERTY keyboard for inputting text. To display the keyboard, select the text entry field and press 3 , or tap the text entry field. About the software keyboard Characters are arranged on the keyboard in the same order as on a typical mobile phone. • You can switch to the software keyboard when the QWERTY keyboard is displayed by ↑↓... -
Page 27: About The Qwerty Keyboard
About the QWERTY keyboard Characters are arranged on the keyboard in the same order as on a typical PC. • You can switch to the QWERTY keyboard when the software keyboard is displayed by ↑↓ tapping " ". ① Conversion candidates Words, etc. predicted from the characters you have entered are displayed. ②... -
Page 28: Using A Microsd Card
Using a microSD card You can insert a microSD card or microSDHC card into the memory card slot. • While data on a microSD card is being accessed, do not turn the power off or subject the microSD card to shock. Doing so might damage data. • Operation of the following microSD cards has been confirmed to be in accordance with in- house standards. -
Page 29: Copying Data On A Pc
Copying data on a PC You can connect the product to a PC using the USB cable (provided), and copy data on the PC to the memory in the main unit or a microSD card inserted in the memory card slot. Connect the product to the PC using the USB cable Check the orientation of the cable terminal, and insert the smaller end of the USB cable horizontally into the USB connector on the product. -
Page 30: My Library (Electronic Books)
My Library (Electronic Books) Reading electronic books You can read electronic books in XMDF*, PDF and ePub formats on the product. * XMDF format data can only be displayed if the content is preset or has been downloaded with the product. →... -
Page 31: Moving To A Page You Want To Read
Moving to a page you want to read → In the page display, 5 tap “Move" Select the move method Move to Specified Position Moves from the start (0%) in an electronic book to a specified position up to the end (99%). Move To Bookmark Two bookmarks can be inserted at any desired position, and one bookmark is set automatically when the electronic... -
Page 32: Sorting Books
Sorting books You can sort books currently saved in the library. → In the home screen, select "My Library" The electronic book list screen is displayed. Press 5 Select the sort method Sort by Date Sorts books in the order of date that they were saved. Sort by Title Sorts books in order of title. -
Page 33: Renaming Folders
Renaming folders → In the home screen, select "My Library" The electronic book list screen is displayed. Select the folder you want to rename → → select "Rename Folder" Tap the entry field, and enter the folder name Tap "OK" Moving electronic books You can move electronic books to a microSD card or the main unit. -
Page 34: Lismo Book Store
LISMO Book Store Here, you can buy electronic books, and view ranking, special editions, latest information, etc. ■ a u one-ID To use the LISMO Book Store, the au one-ID is required. The au one-ID is a free ID provided by KDDI. You can use an already acquired au one-ID or acquire a new au one-ID at the LISMO Book Store. -
Page 35: Using The Lismo Book Store
Using the LISMO Book Store • Set the current date and time correctly in advance ( ▶ P. 40). If the current date and time is not set correctly, it may not be possible to communicate with the LISMO Book Store. → In the home screen, select "LISMO Book Store" The LISMO Book Store top screen is displayed. ①... -
Page 36: Applications
Applications Notes There are two ways of entering notes in Notes, by using the keyboard or by using the stylus pen. Using the keyboard to enter → In the home screen, select "Applications" → Select "Notes" The Notes list screen is displayed. The text entry screen is displayed. →... -
Page 37: Using The Stylus Pen To Enter
Using the stylus pen to enter → In the home screen, select "Applications" → Select "Notes" The Notes list screen is displayed. The handwriting screen is displayed. Draw pictures or writing with the stylus pen : Draws pictures or writing. : Rubs out drawn pictures or writing. : Adds on one more page. To exit without saving, tap "Cancel". -
Page 38: Moving Notes
Moving notes You can move all notes currently saved on the main unit to a microSD card and move all notes on the microSD card to the main unit. → → In the Notes list screen, 5 select "Move" The screen for confirming the move is displayed. →... -
Page 39: Drawings
Drawings Drawing drawings → In the home screen, select "Applications" → Select "Drawings" The Drawings list screen is displayed. The Drawings screen is displayed. Draw pictures with the stylus pen You can select the brush size. : Draws pictures. : Rubs out drawn pictures. To exit without saving, tap "Cancel". ◎... -
Page 40: Moving Drawings
Moving drawings You can move all drawings currently saved on the main unit to a microSD card and move all drawings saved on the microSD card to the main unit. → → In the Drawings list screen, 5 select "Move" The screen for confirming the move is displayed. →... -
Page 41: Settings
Settings Switching between Japanese and English as the display language When you buy the product, Japanese is set as the display language. You can change the display language to English. 設定 → In the home screen, select " (Settings)" 言語 →... -
Page 42: Setting The Network
Setting the network The product supports the 3G network and wireless LAN. ◎ The 3G network and wireless LAN cannot be used simultaneously. Switching the 3G network ON or OFF When you buy the product, ON is set. By setting it to OFF when not transmitting, it reduces battery usage and increases the operating time. -
Page 43: Setting The Password
Setting the password When a password is set, you must enter that password when the product is started up. This prevents other people from operating the product without your permission. Setting the password for the first time → In the home screen, select "Settings" → Select "Password" →... -
Page 44: Telecommunication Signing
Memory usage status on the main unit, microSD card usage status, remaining battery level, and software version are displayed. Press 2 The wireless LAN Mac address, biblio Leaf serial number, communication module serial number, and telephone number are displayed. Upgrading the communication software →... -
Page 45: Software Update
Software Update The following describes how to update the software using a microSD card. Insert the microSD card to the memory card slot of the product in advance. Access the download site on a PC, and download the ZIP file (example: FCS02_V1.G00.00.zip) The URL for the download site is shown below. -
Page 46: Appendix
Appendix Troubleshooting ▶ Press the RESET button ( P. 16) with a fine-tipped object to restart the product. If this does not solve the problem, refer to the following table. Problem Check Refer to • The product does Is the battery pack attached properly? P. -
Page 47: After-Sales Service
■ Performance parts for repair The Company retains performance parts for repair of the biblio Leaf SP02 main unit and its peripherals for six years after discontinuation of production. "Performance parts for repair" refers to parts required for maintaining the functions of the product. - Page 48 ℃ ℃ Operating environment Ambient temperature: 5 to 35 Ambient humidity: 35% to 85% Display Size 6 inch × Resolution 800 (V) 600 (H) dots Aspect ratio Should be corrected to Visible angle Horizontal: 180° "Approx. 13000 pages". Vertical: 180° Power Battery performance Approx.
- Page 49 ■ O pen SSL License [OpenSSL License] Copyright © 1998-2009 The OpenSSL Project. All rights reserved. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/) THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- Page 50 In addition, you may have additional rights with respect to such components under the FreeType License. 4. Your biblio Leaf SP02 contains Adobe®Reader®Mobile software under license from Adobe Systems Incorporated, Copyright ©1995-2009 ADOBE SYSTEMS INCORPORATED. ALL RIGHTS RESERVED. Adobe and Reader are trademarks of Adobe Systems Incorporated.
- Page 51 When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;...
- Page 52 a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
- Page 53 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
- Page 54 by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11.
- Page 55 Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type 'show w'. This is free software, and you are welcome to redistribute it under certain conditions; type 'show c' for details. The hypothetical commands 'show w' and 'show c' should show the appropriate parts of the General Public License.
- Page 56 "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works"...
- Page 57 addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
- Page 58 Exhibit C FreeType License This software is based in part on the work of the FreeType Team. The FreeType Project LICENSE 2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
- Page 59 distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this. The FreeType Project is copyright©1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1.
- Page 60 Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org If you have any other question about third party software of biblio Leaf SP02, Please welcome to contact with us jack.yj.wu@foxconn.com ■...
- Page 61 For inquiries, call: au Customer Service Center For general information and charges (toll free) From fixed-line phones: From au cell phones: 0077-7-111 157 without area code PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR AFTER CALLING 157 ON YOUR au CELL PHONE. For loss, theft or damage and operation information (toll free) From fixed-line phones:...