Advertisement
Q19: Why the ADSL modem never shows its name under Modem Properties. How can I check its status?
A19: Because ADSL modem is not normal modem, you can double-click Globespan DSL Modem Icon under Control Panel or
double-click the two-arrow icon at the bottom right hand side of your desktop windows to check the modem status.
Q20: I found the DSL modem icon shows under Control Panel after installation. So far, I'm unable to access to it by double-
clicking as it never respond.
A20: Please check your ADSL modem whether it is connected properly.
Q21: Modem Test Fail under " Diagnosis software". Can it be my modem spoilt?
A21: No, if your ADSL line has not been activated or connected, also cause "Modem Test Fail".
Q22: I tried to configure the GDSI-ADSL dialer under Dial Up Networking but fail, why?
A22: You can not configure ADSL modem which is not like normal modem.
Q23: My notebook hangs after I connect the modem for few minutes? Can it be the modem fault?
Q23: No, it could be power management problem. you can try to disable "Allow the computer turn off this device to save power" in
Power management of Prolink DSL Wan Modem under Device Manager. (Control Panel
System Device Manager Network
Adapters Prolink DSL Wan Modem Power Management)
Q24: Under the configuration software, I found there are few modulation modes, which one is the correct mode we should
choose?
Q24: Multimode is default setting. You also can select G.DMT or G.lite mode.
Q25: I found my upload and download speed is not at 1MB and 8MB. Why? Anyway, which should be the reasonable speed
we should have?
Q25: The upload and download speed could be affected by the length, loop and condition of ADSL line.
Advertisement
