PROLiNK WNR1012 Setup Manual

Plug in your external HDD or thumb drive to the WNR1012 USB port. Plug in your external HDD or thumb drive to the WNR1012 USB port.
Plug in your external HDD or thumb drive to the WNR1012 USB port. Plug in your external HDD or thumb drive to the WNR1012 USB port.
•
1) Open your Internet browser and access
does not pop out) and enter admin
2) If you see the Easy Setup Wizard, go to Advanced Setup. If no, skip this step.
3) Go to Administration > USB > USB Information > You will your external storage information
here once detected by WNR1012.
4) Go to USB file sharing and tick 'Enable FTP' and follow the rest of the settings as shown
below or according to your preferred settings. Then click 'Apply'
PROLiNK WNR1012 FTP Setup Guide PROLiNK WNR1012 PROLiNK WNR1012 PROLiNK WNR1012 FTP Setup Guide FTP Setup Guide FTP Setup Guide
http://192.168.123.254
admin as username and password admin admin
(if the Easy Setup Wizard
password password as password. password