Recalling Stored Readings; Using Send - UNI-T UT71A Operating Manual

Recalling Stored Readings

Use the following procedure to recall the stored reading:
l
Press RECALL to recall the stored value and RCL
appears to confirm the operation.
l
The left secondary display shows the index number
"no.xxxx".
l
The primary display shows the corresponding recalled
data.
l
The right secondary display shows the total number
of the stored data.
l
Press button to enable the SEND feature to export
the data to the computer via USB. The software
shows the data storing time and also the data value.
After the data transferring is completed, the SEND
feature will be disabled automatically.
l
Press + or - button to view additional stored reading.
Press and hold RECALL to access quick recalling.
l
Press EXIT to exit recalling.
48
Model UT71A/B/C/D/E: OPERATING MANUAL

Using Send

When using a Send feature, please refer to the Installation
Guide of the included CD-ROM.