UNI-T UT71A Operating Manual page 19

Button
Range feature:
Exit AUTO and enter MANUAL ranging. In MANUAL, select
SETUP
next input range. EXIT to return to AUTO. AUTO is default.
RANGE
Testing resistance signal from calibrator:
When testing resistance signal from calibrator, it is necessary
to press this button to change the maximum display to 4000
counts but the accuracy remains unchanged.
Setup feature:
Access Setup selections, the display shows "SET".
In the Setup mode, each press of SETUP button steps to
the next Selection
Store feature:
RECALL
Store the current measurement value. Press EXIT to exit
STORE
the Store feature.
16
Table 2-2. Functional Buttons
Description
Model UT71A/B/C/D/E: OPERATING MANUAL
Access Method
Press the button once.
Press and hold the button while
turning on the Meter
Press and hold the button for more
than 1 second
Press the button
once.