Descaling Frequency - Saeco Estrosa Manual

MANUAL MACHINES
2.1. Technical specifi cations
Safety system:
Coffee heat exchanger
output: Stainless steel
Pump
Overpressure valve:
Water fi lter:
Flow meter assembly
Consumption:
Technical specifi cations Estrosa and Carezza
Safety system:
Coffee heat exchanger
output: Stainless steel
Pump
Overpressure valve:
Water fi lter:
Consumption:
2.2.

Descaling frequency

Hardness Water hardness
1 Soft (up to 7°dH)
2 Medium (7° - 14°dH)
3 Hard (15° - 21°dH)
4 Very hard
(over 21°dH)
SAECO
2 one-shot thermostats (127°C and 95°C) 1 thermal protector >
184°C
(230/120 V~) 1000 W – for coffee, hot water and steam
dispensing
Ulka Type EP5/S GW approx. 13-15 bar with reciprocating piston
and 120°C cutout 48 W, 230V, 50 Hz, 120V, 60Hz 100V, 50/60 Hz
and Defond A2P03 220-240V 53W
Opening at approx. 16-18 bar
In tank
Only in the single versions with the coffee amount setting
During the heading phase of 8,2A, during the brewing phase 8,5A
2 one-shot thermostats 190°
1900 W 230V – for coffee, hot water and steam dispensing
Ulka Type EP5/S GW approx. 13-15 bar with reciprocating piston
and 120°C cutout 48 W, 230V, 50 Hz, 120V, 60Hz 100V, 50/60 Hz
and Defond A2P03 220-240V 53W
Opening at approx. 16-18 bar
In tank
During the heading phase of 8,2A, during the brewing phase 8,5A
Descaling frequency
Without anti-scale fi lter
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
30 litres (60,000 pulses)
02 TECHNICAL SPECIFICATIONS
With anti-scale fi lter
480 litres (960,000 pulses)
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
Page 01 / 02