Table of Contents
Advertisement
Operating Your Camera
Special
1.Press the SET button to display the setup menu and move the arrow
indicator to 'Special' using the UP or DOWN button.
2. Press the SET button.
Gain: To get brighter picture
- AGC-H: Gain is increased or decreased from 0 to 24dB automatically
as following the illumination.
- AGC-L: Gain is increased or decreased from 0 to 19dB automatically
as following the illumination.
- OFF: Deactivation
DNR(Digital Noise Reduction): To reduce the noise on the screen with
Gain
- Low: low reduction of the noise
- High: high reduction of the noise
Privacy: To mask area which you want to mask
- OFF: Deactivation
- ON: Privacy mode activated
• Press the SET button.
COLOR CCD CAMERA
38
User's Manual
• Move the arrow indicator to area you want to mask.
• Set 'On' using LEFT or RIGHT button.
• Press the SET button and then set the area's bounds with the method like MD1
Set. (see page 29)
• When completed, press the SET button.
Timer: To see the set time. Before you use Timer you need to set the time up.
(24 hour)
- OFF: the time not displayed on the screen
- ON: the time displayed on the screen
Demo: To see your camera's main functions
Reset: To reset your camera to factory default condition
End: To move Top-menu
Exit: To finish setting menu
Notes
• The set time in Timer menu is reset automatically after the power is off.
• If you change the 'Gain' menu from AGC-L to AGC-H, sensitivity is increased as well
as noise on the screen.
• Afterimage may appear with DNR.
• After Demo operated please reset your camera using 'Reset' menu. And then use
your camera with the desired each mode in each menu.
COLOR CCD CAMERA
39
User's Manual
Advertisement
Table of Contents
