Connections To A Tv Or Vcr - JVC GR-D796U Instructions Manual

Connections To A TV Or VCR

To AV
connector
Audio/Video cable
(provided)
VCR
1Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
2Red to AUDIO R IN*
3White to AUDIO L IN*
* Not required for watching still images only.
or
TV
VIDEO PLAYBACK
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the
TV.
5
Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6
Start playback on the camcorder.
( pg. 21)
Please set "16:9 OUTPUT" of Playback Menus
so that the image may suit your TV (16:9 TV or
4:3 TV). ( pg. 32, 33)
To choose whether or not the following
displays appear on the connected TV
Date/Time
Set "DATE/TIME" to "ON" or "OFF" (
Time Code
Set "TIME CODE" to "ON" or "OFF" (
Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/TV"
( pg. 33).
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery
pack. ( pg. 13)
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder's Power Switch
to"REC", then set your TV to the appropriate
input mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
23
EN
pg. 33).
pg. 33).