Assembly & Set-Up; Contents Of Carton - MTD 260 Series Operator's Manual

Assembly & Set-Up

Contents of Carton

• One String Trimmer
• One String Trimmer Operator's
Manual
Assembly
NOTE: This string trimmer is shipped without gasoline or oil
in the engine. Fill up the gasoline and oil as instructed in the
accompanying engine manual BEFORE operating your machine.
Upper Handle
1. Remove the wing knob and carriage bolt from the left
lower handle and the right lower handle. See Figure 3-1.
2. Pivot the upper handle into the operating position.
See Figure 3-1.
Figure 3-1
• One Bottle of Oil
• One Engine Operator's Manual
3. Move the upper handle into one of three positions by
pivoting it forward or rearward. Secure the upper handle to
the lower handle using the carriage bolts and wing knobs
removed in Step 1. See Figure 3-2.
Note: Make sure to use the corresponding hole on the left
side as on the right side of the upper handle.
• One Pack of Trimmer Line
Figure 3-2
3
9