Removing The Complete Direction Indicator - APRILIA Scarabeo 50 I.E.-50 4T Workshop Manual

REMOVING
THE COMPLETE DIRECTION INDICATOR
WARNING
Risk of fire.
Keep fuel and other flammable substances away from
the electrical components.
♦ Place the vehicle on the center stand.
♦ Unscrew and remove the screw (1).
NOTE
While removing the lens, use extra care to be
sure that you do not break the key.
♦ Remove the lens (2).
NOTE
Upon reassembly, position the lens correctly in
its seat.
CAUTION
Tighten the screw (1) moderately and with care to avoid
damaging the lens.
CAUTION
Do not leave fingerprints on the bulb, since these may
cause its overheating and consequent breakage.
If you touch the bulb with your bare hands, remove
any fingerprints with a clean cotton cloth dampened
with alcohol in order to avoid damage.
TAKE CARE TO AVOID DAMAGING THE ELECTRIC
CABLES.
♦ Press the bulb (4) moderately and rotate it counter-
clockwise.
♦ Extract the bulb (4) from its seat.
NOTE
Insert the bulb in the bulb socket, carefully
aligning the two bulb pins with their guides in the socket.
♦ Correctly install a new bulb of the same type.
NOTE
If the bulb socket (5) has fallen out of its seat,
replace it correctly, ensuring that the slot in the reflector
aligns with the screw hole in the body of the turn signal
lamp.
1
4
Release 00 2003-02
Scarabeo 50 I.E.-50/100 4T
5
3
2
41