Cooktop Operation; Acoustic Signal - Whirlpool Oven User Manual

SETTINGS
Turn the "Functions" knob indicator to the symbol
changed.
Clock
Turn the "Functions" knob to the symbol
previous paragraph (SETTING THE TIME).
Eco
With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after the end of cooking.
In addition, the oven light is switched off during cooking. To view information on the display and switch the light on again,
simply press button or turn a knob.
3
1. Turn the "Browse" knob to display "ECO.
2. Press to access the setting (ON/OFF).
3
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button

Acoustic signal

To activate or deactivate the acoustic signal, proceed as follows:
1. Turn the "Browse" knob to display "SOUND.
2. Press to access the setting (ON/OFF).
3
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button
Brightness
To change the display brightness, proceed as follows:
1. Turn the "Browse" knob to display "BRIGHTNESS.
2. Press button : number 1 appears on the display.
3
3. Turn the "Browse" knob to increase or decrease brightness and confirm by pressing

COOKTOP OPERATION

The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a
numerical scale corresponding to different power settings, and a series of function symbols.
• Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with
the cooktop).
COOKTOP FUNCTIONS TABLE (depending on model)
GENTLE HEAT
HEAT MAINTENANCE
FAST BOIL
MULTIZONE
to access a submenu containing four display settings which can be
: the word CLOCK appears on the display. To change the time of day, see the
COOKTOP CONTROL KNOBS
To allow dough to rise, to soften butter taken from the fridge, to keep baby bottles or food warm,
also for making yoghurt, melting chocolate, etc.
This function is only available when the residual heat indicator is on. For this function, make sure
the residual heat indicator of the desired hotplate is on. Turn the knob to
function, change the position of the knob.
To maintain a constant temperature of 60° until the end of cooking. To select this function, turn
the knob to .
This function is used to bring water to the boil rapidly and remains on for a preset time. At the
end of the preset time, the cooktop automatically returns to the maximum power setting. This
function can be selected even during cooking. Important: before selecting this function, make
sure the pot is positioned on the selected hotplate in order to avoid any damage to the cooktop
surface. The stated performance values for this function are those guaranteed for all glass
ceramic cooktops. For this function, place the pot on the selected hotplate and turn the knob
to . To deselect, change the position of the knob.
The multizone symbol, featured on the knobs, can only be switched on for those hotplates of the
cooktop equipped with double or triple zone function. These functions extend the heating area
of the cooktop in order to allow the use of large, oval or rectangular pots or cooking receptacles.
To switch on the dual zone (if available), turn the knob to
indicator for the hotplate begins to flash. To switch on the triple zone function (if available), wait
until the LED begins flashing quickly. Select the power setting required by turning the knob anti-
clockwise. The residual heat indicator remains on to indicate that the cooktop is in use. To
deselect, turn the knob to "0".
GB29
.
3
.
3
.
3
. To deselect the
and wait until the residual heat