NETGEAR WN3000RPv3 Installation Manual page 11

8. If the screen is still displayed on your computer or device, select the
following check box and click the Continue button.
A message displays confirming that the extender connected to the
WiFi network.
9. Click the Finish button.
10. Unplug the extender and move it to a new location closer to the area
with a poor WiFi signal.
The location that you choose must be within the range of your
existing WiFi router network.
11. Plug the extender into an electrical outlet.
The Power LED
does not light, press the Power button.
12. Use the Router Link LED
extender-to-router connection is optimal.
lights green within one minute. If the Power LED
to help you choose a spot where the
11